Water damage drying
Fire & smoke cleanup
Mold remediation
Storm response
Sewage cleanup
ReconstructionFree visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Get your free estimateStorm Damage Restoration in Austin: What It Costs and How Fast We Can Get There
Storm damage restoration in Austin typically runs between $2,800 and $12,500 for most residential jobs, depending on how far water traveled through the structure. Wind-driven rain, flash flooding, and downed trees create different damage than a simple pipe leak, and the clock on mold starts within 48 hours in Austin’s humid Hill Country air. Marsh Water Damage Austin answers calls live around the clock at (361) 315-6142, and we’ll give you a written price before any work starts.
Key takeaways:
- Storm restoration costs in Austin usually fall between $2,800 and $12,500 for residential work.
- Mold becomes a serious risk after 48 hours of moisture in Austin’s climate.
- We send a background-checked, photo-badged technician by name before the visit.
- Written price, written guarantee, and a 365-Day Done Right Promise on every job.
Fast, Reliable Storm Damage Restoration Across Austin
When a thunderstorm rolls off the Balcones Escarpment and stalls over central Austin, the rain doesn’t fall politely. Creeks like Shoal Creek and Waller Creek jump their banks, streets in low-lying neighborhoods become rivers, and that water finds its way under doors, through window flashing, and into the pier-and-beam crawlspaces of Hyde Park and Travis Heights. We know these neighborhoods. We know which streets flood first and which homes hide water at the sill plate long after the surface dries. Our team covers all of Austin, including Pflugerville, Round Rock, and the surrounding Hill Country. Call (361) 315-6142 the moment water enters your home.
Our Storm Damage Restoration team handles everything from tarping a wind-blown roof to full structural drying after flash floods. We’re based here in Austin, which means our crews don’t drive in from San Antonio or Dallas. We’re minutes from Mueller, East Austin, and Tarrytown, and we carry the equipment needed to start extraction on the first visit.
Restoration work we handle
Why Marsh Water Damage Austin Is Austin’s Preferred Storm Damage Restoration Company
Since 2005, Marsh Water Damage Restoration has been part of the Threshold Group family, applying the same commercial-grade drying standards to residential jobs across Austin. We didn’t start as a handyman service that added water damage to a list of services. Storm and flood work is what we do every day, and Austin’s mix of 1960s ranch homes, 1940s bungalows, and post-2010 slab construction means our technicians see failure patterns most companies never encounter.
Every technician who walks up to your door is background-checked, identity-verified, and sent to you by name and photo before the visit. That’s the Threshold Verified standard, and it’s not optional. When Tobias Reyner dispatches a crew to a home in Zilker or Cherrywood, the homeowner knows exactly who is coming. That matters when you’re letting someone into your house after a storm has already taken something from you.
Our equipment comes from Dri-Eaz, Phoenix, and XPOWER, the same brands used on large commercial losses. Our technical team holds credentials through IICRC, RIA, and IFA. And our 365-Day Done Right Promise means if the repair fails within a year, we come back and fix it free. That promise is printed on every work order we hand to an Austin homeowner.
Flood Restoration in Austin
Flood restoration in Austin is about more than pumping water out of a living room. The water that pours into a home near Onion Creek or Barton Creek during a flash flood is Category 2 or Category 3 water, meaning it carries silt, bacteria, and sometimes sewage. You can’t just dry the carpet and call it done. Our flood restoration process starts with extraction, then psychrometric readings (measuring the moisture in the air and materials) to map how far water traveled, then containment and structural drying with Dri-Eaz air movers and dehumidifiers. Most Austin flood restoration jobs run $3,200 to $9,800 before contents cleaning.
Category 2 and 3 Water Handling
Floodwater in Austin is not clean. It moves through yards, streets, and creek beds before it reaches your foundation. We treat it accordingly, setting containment barriers and using negative air pressure to keep contaminated aerosols out of dry rooms. This is not optional work, and skipping it is the most common way Austin homeowners end up with a mold problem that costs twice as much to fix.
Slab and Crawlspace Flooding
Water behaves differently in a 1980s ranch on a limestone slab in Crestview than it does in a pier-and-beam bungalow in Bouldin Creek. Slab homes hide water under flooring and behind baseboards. Crawlspace homes wick water upward through the subfloor. Our moisture mapping pinpoints both patterns, so we dry what’s actually wet, not what looks wet.
Basement Flood Cleanup in Austin
Basement flood cleanup in Austin is less common than in northern cities, but the homes that have basements tend to be older, and they sit low. In neighborhoods like Pemberton Heights and Old West Austin, basements built before modern waterproofing collect water during every heavy storm. That water sits against concrete, seeps through cracks, and soaks whatever is stored down there. Basement flood cleanup in Austin ranges from $2,400 to $7,800 depending on square footage and whether structural drying is needed. We can usually start extraction the same day you call.
Sump Failure and Groundwater Intrusion
When Austin’s creeks rise, the water table rises with them. Basements with sump pumps fail when the pump is overwhelmed or loses power. We pull the water, map the moisture in the concrete and drywall, and set drying equipment sized to the space. If the pump failed, we’ll document it for your insurer while we dry the structure.
Mold Prevention During Basement Drying
Basements in Austin stay humid even when they’re not flooded. Add storm water, and you have a perfect mold environment. Our drying plan always includes a humidity control phase, not just extraction. We track conditions with daily psychrometric readings until the structure is genuinely dry. That’s how a basement flood cleanup stays a cleanup and doesn’t become a mold remediation.
Trusted Brands We Service in Austin
We work on all residential storm damage, regardless of brand or system. Austin homes carry a mix of standard and wind-rated products, including garage doors, entry doors, window packages, and roof decking from major manufacturers. Because we’re local to Austin, we stock common storm-prone parts like replacement track assemblies, panel sections, weather seals, and hinge packages, which means faster turnaround when a storm blows through. We service and reinforce wind-rated and impact-rated doors across Austin, from standard builder-grade doors in Riverside to custom units in Westlake. If your door failed during a storm or you’re upgrading before the next one, call (361) 315-6142.
See the difference
Before
After
Before
After
Before
AfterCommon Storm Damage Restoration Problems We See in Austin Homes
- Wind-blown door failures. Austin sits on the edge of Tornado Alley, and spring storms bring straight-line winds that peel standard garage doors out of their tracks. A door that flexes during a storm lets rain drive into the garage and through the ceiling into the home.
- Sill plate rot on blackland prairie clay. Austin’s expansive clay swells and shrinks with rainfall, cracking foundations and leaving gaps at the sill plate. Storm water follows those gaps into wall cavities in 1960s and 1980s ranch homes across North Austin and beyond.
- Track and panel damage from debris. Hail and wind-driven branches dent door panels and bend track assemblies, which binds the door and makes it unsafe to operate. A damaged door left in place is a security risk and a water entry point.
- Hidden water under pier-and-beam homes. In central Austin neighborhoods like Hyde Park and Travis Heights, original 1940s galvanized supply lines corrode in the alkaline Edwards Aquifer water. Storm runoff entering the crawlspace accelerates the corrosion at threaded joints, causing slow leaks that rot subfloors.
Pricing for Storm Damage Restoration in Austin, TX
Storm damage restoration in Austin follows a few consistent price bands. Flood extraction and drying for a single room runs $2,400 to $4,600. Whole-home Category 2 water losses are usually $5,800 to $9,800. Basement flood cleanup sits between $2,400 and $7,800 depending on water depth and how long it’s been standing. Door track and panel replacement after wind damage typically runs $450 to $1,900 per door, plus framing repair if the opening was pulled out of square. Every Austin job gets a written price before work begins, not a verbal estimate that grows after demo. Call (361) 315-6142 and we’ll walk you through what applies to your home.
We Also Serve Cities Near Austin
Our crews respond to storm damage calls throughout the greater Austin area, including Austin neighborhoods like Mueller, East Riverside, and Allendale, plus the surrounding communities of Cedar Park, Hutto, Georgetown, and Elgin. If you’re in one of those areas and water just came through your door, call (361) 315-6142.
Serving Austin, TX - Our Local Coverage Area
We’re based in the Austin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Storm Damage Restoration in Austin
Mold starts growing in a flooded crawlspace in Austin within 48 to 72 hours, faster if the storm hit during summer heat. The first thing to do is call us at (361) 315-6142. While you wait, shut off power to any area where water has reached outlets, and don’t enter standing water that may be Category 3. We send a technician by name and photo before the visit, and we can usually start extraction the same day you call.
Slab-on-grade homes hide water under flooring, inside wall cavities, and along the sill plate where the foundation meets the frame. We use moisture mapping to find water that isn’t visible. A Travis Heights bungalow on piers lets water move under the house itself, wicking up through the subfloor and into original 1940s galvanized pipes, which corrode faster once storm water enters the crawlspace. Each structure requires a different drying plan, and our Austin crew has worked both for years.
Austin’s building codes have moved toward wind-rated and impact-rated door requirements because straight-line winds and hail regularly damage standard doors. If you skip reinforcement and a door fails during a storm, rain enters the garage or the house itself, and your insurance claim may be complicated by the lack of code compliance. We inspect existing doors, reinforce or replace track systems, and document the work for your insurer. Call (361) 315-6142 for an assessment.
Drying and mitigation work doesn’t typically require a permit in Austin, but replacing structural framing like rotted sill plates often does, depending on the city’s current requirements. We handle that process and include it in the written scope before work starts. You won’t find out about a permit issue after we’ve already opened the wall. Our team knows Austin’s permitting expectations and builds the schedule around them.
You start structural drying immediately, and you document everything for the adjuster. We take photo documentation of the damage, run psychrometric readings to establish the moisture baseline, and set Dri-Eaz air movers and dehumidifiers while you wait for insurance approval. We work directly with adjusters and provide the documentation they need. Waiting even a few days in Austin’s humidity gives mold a head start. Call (361) 315-6142 as soon as water enters the house.
Written by Tobias Reyner, Owner at Marsh Water Damage Austin, serving Austin since 2005.